Maxicover Pliotex

A weather resistant, textured matt finish with good dirt shedding
Size
Paint Calculator
This product is not for online sale and can only be purchased from selected stores.
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Matt
  • Coverage Approx 5-6 m² per litre per coat
  • Drying Time 1 hour
  • Coats 1
Product Features
  • LONG LASTING PROTECTION
  • WEATHERPROOF
  • HIDES IMPERFECTIONS
  • GUARANTEE 8 YEARS

Product Description

Maxicover Pliotex is a weather resistant, textured matt finish with good dirt shedding

Application Description

Ready for use with brush or roller. Spray is not
recommended as Maxicover Pliotex contains fine marble
aggregate.
Rolling It is important not to overspread the product. Two
coats should be applied allowing at least four hours between
coats.
Caution: Textured coatings are prone to application
restrictions to some degree. Adhere strictly to
recommended spreading rate. If the spreading rate is
exceeded, the film thickness is reduced. On the other hand,
if the paint is under-spread, thicker patches would be visible
on flat surfaces. Apply with overlapping V-shaped strokes,
i.e. a combination of horizontal, diagonal and vertical
strokes. It is also very important to maintain a wet edge
during application. N.B. We recommend that a lamb’s wool
roller be used. The pile on synthetic rollers is longer,
making the desired result difficult to achieve.

Health & Safety

"For detailed safety information refer to Material Safety Data Sheet. Keep out of reach of children. Ensure good ventilation during application and drying. Flash Point 37ºC."

Tips & Advice

  • 1. Preparing the Surfaces
    Suitable for cement plaster, gypsum plaster, concrete, fibre cement, PVC, galvanised iron, ferrous and wooden surfaces provided that appropriate preparation and priming is carried out.
  • 2. Cleaning
    Clean immediately with water
Fetching the data, please wait...