Hammerite Direct To Rust - Hammered

Hammerite Direct To Rust Metal Paint is a single pack air-drying coating which delivers a decorative, corrosion resistant finish.

Select a Colour

Quantity

Paint Calculator

This product is not for online sale and can only be purchased from selected stores.

Find a Store

Your Measurements:

Amount Needed:

For the best result we recommend to use {coatAmount} for {productTitle}

Key information

Finish Smooth gloss incorporating a hammered pattern
Coverage Approx 10 m² per litre per coat
Drying Time 1-2 hours
Coats 2

Product Features

GUARANTEE 8 YEARS
ANTI-RUST
WATER REPELLANT
LONG LASTING PROTECTION

Product Description

Hammerite Direct to Rust Metal Paint is specially formulated to perform as a primer, undercoat and topcoat in one for ferrous metal. With DUALTECH it provides two-way
protection by repelling water it limits surface damage, and by stopping rust forming underneath with its anti-corrosion formulation it, keeps the metal stronger for longer.

Application Description

Brush,conventional spray or airless spray,aerosol

Health & Safety

"For detailed safety information refer to Material Safety Data Sheet. Dulux paints contain no added lead. Solvent-based paints are flammable. Do not smoke during painting. Avoid contact with skin or eyes. Keep out of reach of children. If accidentally swallowed, seek medical advice immediately and show this container to the doctor. Dry sanding, flame cutting and/or welding of the dry paint film will give rise to dust and/or hazardous fumes. Wet sanding should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used. Do not empty into drains or watercourses. Ensure good ventilation during application and drying. It is recommended to use suitable protective clothing and equipment. Store containers in a cool dry place at temperature not below 5°C. To avoid the risk of spillage always store and transport containers in a secure upright position"

Hazard information can vary based on the colour of a product. Please choose a colour to see the relevant health and safety guidelines for this product.

Download Adobe Reader

Tips & Advice

1. Preparing the Surfaces

Suitable for direct application to correctly prepared ferrous metals and correctly prepared and primed non-ferrous metals.
2. Cleaning

Hammerite Brush Cleaner/Thinner

How much paint do I need?

Measure your dimensions

Do you know the area?

No Yes

Enter your measurements

Meters Centimeters

Paintable area

Width *

Height *

Area *

m²

More than one wall to paint? Try our advanced paint calculator

Measure the height and length of the surface you want to paint (in metres or centimetres).

Your Measurements:

Amount needed:

This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

More than one wall to paint? Try our advanced paint calculator